Marathon

Anyone still on their event out after this time will be regarded as a pedestrian and, therefore, must obey the rules of the highway code regarding pedestrians. Walkers are required to use the footpaths at all times. Participants Participants for the Half & Full Marathon must be age 18 or over on the day of the race. If any participant is unwell prior to the event he/she is advised not to take part. Please arrive at least 45 minis before the start of your event, this will enable you to familiarize yourself with toilets, refreshments and the start and finish areas.Please note the organizers cannot accept responsibility for any loss or damage of your reporter. Entry fees are not refundable. All participants must register during the allocated times in order to collect their race number, micro chip, and goody bag. These items cannot be posted out. The registration office will be staffed on Directions from Belfast At the Mourner Country Hotel roundabout go straight. Continue down the Belfa st Road/Downslide Road for c. Miles.At the next roundabout (at Newer Courthouse) turn right. Take the next Right and continue to WIN Business Park. Directions from Dublin Continue on the main AY road towards Belfast and take the slip road for the Cucamonga Road Junction. At the bottom of the slip road take the third exit heading for the Vivifies roundabout. At the Vivifies roundabout take the fourth exist for Newer Go to the bottom of the road. At the traffic lights the only option is to turn left. Also take the next left and continue to WIN Business Park. Directions from Armada At the Vivifies roundabout go straight (taking the 3rd exit for Newer).Go to the bottom of the road. At the traffic lights the only option is to turn left. Take the next left and continue to WIN Business Park. Running Number All participants will receive individual running numbers. The running number is specifically allocated and cannot be exchanged without authorization from the race director. Please note t he medical staff are provided with a competitor list and will not be aware of any changes unless notified in advance. Numbers must be attached to the front of running tops, mutilation or non-display of numbers will lead to disqualification.Championship Champion chips will be given out at registration and will be allocated only to one entrant. Chips cannot be exchanged with another participant as this will affect corded times. The chip is the property of Timing Ireland and all chips will be collected at the finish line. Lost chips are charged to Newer City Marathon Ltd at a cost of E per chip. The Marathon Course. Starting outside the Newer Credit Union Building on Hill Street at 9:AMA, will take the following route. Hill Street south towards William Street.Right onto Dublin Bridge and then a U-turn on Dublin Bridge and right turn onto footpath along River Street, Warrenton Road until leaving footpath and going onto road toward Greenback Industrial Estate Roundabout. Onto hard-should er of Warrenton dual-carriageway towards Warrenton. The route through Warrenton is Newer Street, Church Street right along Dock Street by the Square, keeping on the right-hand side of the road, Marine Parade where you go onto the Promenade as far as the Baths, crossing the road at this point onto Queen Street, Church Street and back toward Newer on the same carriageway staying right. I. E. Running on inside lane) proceeding to Greenback Industrial Estate Roundabout for the halfway mark and picking up the Half Marathon runners to proceed to Warrenton along the same route as before. On the return to the Greenback Roundabout stay on the road until the footpath at Warrenton Road onto River Street, left onto William Street to Dublin Bridge, Then a right IS- turn to William Street and a left onto Hill Street to the Finish at Newer Credit Union. The Half Marathon Course.Starting at Pair Osler in Greenback Industrial Estate at 10:AMA the route goes onto the Warrenton dual-carriageway on the hard-shoulder staying right toward Warrenton The route through Warrenton is Newer Street, Church Street right along Dock Street by the Square, keeping on the right-hand side of the road, Marine Parade where you go onto the Promenade as far as the Baths, crossing the road at this point onto Queen Street, Church Street and back toward Newer on the same carriageway staying right(I. E. Running on inside lane): proceeding to Greenback Industrial Estate Roundabout . N the return to the Greenback Roundabout stay on the road until the footpath at Warrenton Road onto River Street, left onto William Street to Dublin Bridge, Then a right IS- turn to William Street and a left onto Hill Street to the Finish at Newer Credit Union. The Walk Course. Starting at Pair Osler in Greenback Industrial Estate at 10:AMA the route goes onto he Warrenton dual-carriageway on the north bound side WALKING ON THE FOOTPATH AT ALL TIMES toward Narrow Water Keep. Turning at Narrow Water Keep and proceeding back to ward Newer on the same footpath to Greenback Industrial Estate Roundabout.Onto the footpath at Larrikin Spar Garage then onto River Street, left onto William Street to Dublin Bridge, Then a right IS- turn to William Street and a Left onto Hill Street to the Finish at Newer Credit Union. The Fun Run Course. Starting outside the Newer Credit Union Building on Hill Street at 1 1 :Moa, will take the following route. Hill Street to Killdeer Street, Left onto Killdeer Street onto the Mall to Mar's Street, left onto William Street and left onto Hill Street to finish at the Newer Credit Union.Mile Markers Both the half and full marathon will be individually mile marked. Refreshment Stations Water stations every three miles on the Marathon and Half Marathon courses. Sports drink stations at approximately 8 and 18 miles. Energy gels will be available at some water stations for athletes who have found these of benefit dung their treating PLEASE DISPOSE OF LITTER RESPONSIBLY IN BINS PROVIDED- T HANK YOU. Race Retirement Should any participant retire at any time during the race, they must inform the nearest marshal.There will be a sweep vehicle following the race, which can take you back to the start. Spectators Spectators are very welcome but should not venture onto the course. Marshals Specific Event trained marshals will be in place along the course. They will be clearly identified with high-visibility vests, you must obey their advice/instruction to keep yourself safe at all times, and traffic disruption to a minimum. Timing and Results There will be a Champion Chip timing mat at the finish.All participants must cross his to enable results to be recorded. Results will be displayed at the finish and will be available on the website www. Merchantability. Com. Time Keeper Glenn Grant Champion Chip Timing Results Derek Cowan/Glenn Grant Race Starter Representative from the Main Sponsor. Mr. Sean McCracken The referee's decision will be final. There will be no entries accept ed on the day Post Run There will be limited facilities for sports massage at the finish area. Presentation of prizes will take place at the earliest opportunity.By taking part, all participants have agreed for their names and any footage or photographs taken during their articulation in the marathon to be used to publicist the marathon event. Participants acknowledge and agree that personal information (including medical information entered on my race number or collected by event medical staff during or after the Event) can be stored, used and disclosed by the Newer City Marathon in connection with the organization, promotion and administration of the Event and for the compilation of statistical information.If a participant becomes ill during or after the Event and/or receive medical attention or treatment either from event medical Taft, SST John Ambulance or any doctor or hospital, he/she authorities such persons to provide their details (including details of medical treatment) to the Medical Director of the Newer City Marathon or others authorized by him.Marathon Officials reserve the right, in their sole discretion, to modify, supplement or waive all of the Official Rules. Participants shall be bound by any modification or supplement of the Official Rules published prior to the Marathon. Failure to follow these Official Rules, as may be amended, will result in immediate disqualification, loss of prize money and ejection from the event.

A Most Dangerous Game

â€Å"It is a very great pleasure and honour to welcome Mr. Sanger Rainsford, the celebrated hunter, into my home. † These are the first words spoken to Rainsford by General Zaroff upon his arrival on Ship-trap Island. Formally greeting Rainsford gives Zaroff an appearance of a proper gentleman; well-educated and well-mannered. But by his dark eyes, military moustache, and strong face you can also tell that he is obviously a strong leader and military general.Behind his high cheek bones, white hair and sharp nose is a strange madness not reflected by his looks. Murdering fellow human beings despite his proper look provides a stark contrast between what is seen on the outside and what personality lies on the inside. Much better described then the other characters in the story, General Zaroff is obviously a â€Å"round† character in the story â€Å"A Most Dangerous Game†.Through his words and actions we are given a deeper view of the General Zaroff character and fr om that information it is easy to assume his way of thinking and his reason for making certain decisions. Giving General Zaroff’s character a lot of depth creates the perfect â€Å"round† character. Sticking to his belief that killing humans is great fun and more of a sport then murder through the entire story, General Zaroff is a static character who obviously never learned a lesson from his experiences.Arrogant, proud, and inconsiderate to the great value of life, General Zaroff is a pretty bad guy. ‘But the sharp eyes of the hunter stopped before they reach the limb on which Rainsford lay; a smile crept across his face†¦ he turned his back on the tree and walked carelessly away. ’ In this short couple of sentences, the author demonstrates the arrogance of Zaroff. To demonstrate his inconsiderateness to the value of human life, Zaroff, when asked why he could do such a thing (hunt another human being) he answers, â€Å"Ennui. Boredom. By hunting Ra insford, Zaroff demonstrates that he is looking for a worthy opponent and by not sending him off with the others who got trapped on the island to exercise and gain muscle he obviously sees Rainsford, a fellow hunter, as a worthy opponent. Casually walking away from the tree he knew that Rainsford was in shows that because he knew exactly where Rainsford was, he wanted to give him another try to escape, mostly because he expected a lot more from him and was still bored because Rainsford was too easy to track.By saying things like, â€Å"Not many men know how to make a Malay mancatcher†¦Ã¢â‚¬  and, â€Å"Your Burmese tiger pit has claimed one of my best dogs. Again you score. † shows that he is obviously impressed by Rainsford’s intelligence and creativity. The author tells us a lot about General Zaroff in many different ways as to give contrast to the character. Though the things he says and does are very much the same, his physical appearance (shown by what the author tells us about him) is very difficult then how he behaves throughout the story.

Eminent Domain

Eminent Domain Business 186 The ancient right, for the government to take property from an individual with out consent for a common good is called Eminent Domain. Some examples of a common good are, to build a dam, an airport, a hospital or a highway. The U. S. constitution understands that right; as long as â€Å"just compensation† is paid they are permitted to take the privet property for public use. However, New London took land from one privet party and gave the property to another privet party. By doing so the city promises to attract new growth, which in return will help invigorate the community and bring in more tax revenue.The area they want to build all these new structures is where the Undersea Warfare Center of the Navy was. When the Navy moved it took 1,400 jobs with it. The unemployment rate of the city only got worse. This has been a rough neighborhood for quite some time. Pfizer, a pharmaceutical company built a $350 million research center, which created 1,400 job opportunities. Since then the government has created parks and opened up the river fort access to the public. Furthermore, the city wants to build new homes for professionals, office buildings and a hotel.They want space to build these luxurious homes for the professional employees of Pfizer. The houses that sit above the Thames River in front of Fort Trumbull is the area they want to use to build all these new structures. Though many people have left their houses, there are still a few that remain in their homes in this area. The city is offering a fair price for their homes but the residents do not want the money, they just want to keep their homes that they worked very hard to get. The Supreme Court upheld the city’s condemnation right; the homeowners had to forcefully sell their homes.It ruled that required purchase to foster economic development falls under public use and is constitutionally permissible. By making this decision the Supreme Court drives the argument o ver eminent domain back to the states and local communities. Eminent domain has been used correctly to rebuild decayed urban areas or start economic growth; conflict now is rising with political and legal battles, there are many states that are taking advantage of it. In 2009 Pfizer closed its New London location and transferred its 1,400 employees to a campus the company owns in Groton, Connecticut.I enjoyed this article because it opened my eyes to what people are experiencing around the country with Eminent Domain. I don’t think New London treated their residents fairly by authorizing these structures built over their homes. Towns such as New London and others are not pursuing their decisions wisely as to their beneficial and progressive social policies. I think that they are socially harming and being biased against ordinary working people and small business owners. I do not think that eminent domain is a morally legitimate right of the government.I do not think that the government should have the right to take away your property. It takes someone about thirty years to pay off a home and finally be able to call it their property and not the banks. I think that after thirty years of slaving away making payments and paying interest rates, the government should not be able to just come in and take your property, it is not morally correct. Now on the other hand, if the property is abandoned then yes, the government should be able to obtain it for public use. I do not think its right for the government to forcefully vacate someone from his or her home to use it publicly.

Health communication- SWOT analysis Essay Example | Topics and Well Written Essays - 500 words

Health communication- SWOT analysis - Essay Example Articulate: Another significant strength in me is my eloquence. I properly articulate my words and ensure that all points reach home. My mastery of the English language is one key contributor to my eloquence. Each and every time I talk to any patient, I see them nod their head indicating that they truly understand whatever I am saying. I think my use of simple language also helps me in talking to the non-native speakers of the language thus creating easier understanding to the patients. Compulsive: one of the greatest strength of mine is my irrationality and compulsive. I am always a driven and uncontrollable whenever I give orders and directions. It helps in strengthening my communication besides my leadership skills. Time pressure: I am one person who cannot work effectively when pressurized. I easily get tensed when harassed and can do a lot of mistakes. Again my sluggish nature in my daily dealings also leads to these mistakes ones time is up. Can be impatient; in as much as I may say that I have good listening skills, a times I find myself very impatient. It really occurs when a patient may be sluggish in his communication and tends to talk too slowly due to their sickness. I would constantly yawn and show signs of impatience and end up getting nothing at all from the patient thus use my own assumptions. To receive proper coaching on communication skills: It would help me improve the weaknesses and develop new strengths in my career. Learning is a continuous process and is constant in their person’s life. I would highly recommend some personal coaching either part-time or full time coaching. To acquire and learn other skills from other workmates who perform the same roles in the work place. It would assist me develop confidence in myself and come up with new ideas and skills in the same field. Malty lingual: there is a new tendency of people who either speak French or Arabic seeks for my attention. It is a great threat to my career since I will

Itizenship participation Essay Example | Topics and Well Written Essays - 1250 words

Itizenship participation - Essay Example The research on Niger Delta of Nigeria is important because it shows how some of the multinational oil companies exploited Nigeria and robbed them of their riches. It also shows the irresponsible behaviour these oil companies in terms of corporate social responsibility and their indulgence in the interior political matters of Nigeria. The main idea of corporate social responsibility or CSR is to take up some responsibilities towards the society by the corporate world. In Nigeria the corporate communities always hide behind the Nigerian government when it comes to fulfil social responsibilities. Because of these oil companies most of the environment has been polluted. Many of the ethnic groups under the leadership of internationally known author Ken Saro-Wiwa protested oil production. With the help of Nigerian government the oil industries were able to suppress the protests, which is not in the best interests of the citizens of Nigeria. Instead of these hiccups its business as usual for the oil companies and Nigerian government because of the foreign exchange revenue. Since the citizens didn't come under the stakeholders list companies ignored their protests. CSR should always be a part of corporate strategies that shows social responsibilities are as important as profit maximisation. Practically implementing the above-mentioned tasks are very difficult. The destruction of human rights by both the parties can be complained to the UN that takes some time. The Nigerian government can only be requested because it's their internal matter and can only be forced to stop by developed countries like US and Japan or UN. The only approach can be through UN and make the Nigerian government realise that oil production should be done within best interests of their citizens and should impose restrictions that companies like Shell employ CSR activities effectively in the Niger Delta. Facilities The requirements for this project are easily available. The requirements are having a personal computer with Internet, if not working in an Internet is also permissible. Should be able write in forums or any blog sites about the atrocities done by the Nigerian government on their citizens and the role of oil companies. If possible use print media to reach most of the people. The best way to reach out the people is to have a website on Niger Delta and put all the details with photographs that describe the poor conditions of the people and environmental hazards caused by the oil companies. Budget 1. Including personal computer the cost will be $500. 2. If pc is excluded then the budget will be around $250-$350. The funds haven't been acquired yet. The sources of funding the project are expected to be through NGO's and some charitable

Topics in Literature English Essay Example | Topics and Well Written Essays - 1000 words

Topics in Literature English - Essay Example Characterization can be a simple or a complex process. Basically, characterization is what characters "say" and "do" (The National Library Literacy Strategy, 2001, p. 2). Each character is seen as being made up of a number of dimensions: sense of identity, age, gender, religious persuasion, temperament, physical appearance, values, expectations, dreams, disappointments, inadequacies and loss, to name a few. The Shreklisch Onion Layer Model of characterization stresses that the psychological profile of the fictional character must incorporate emotions, back-story, beliefs, practices and intentions (Wikipedia, 2006). It is by way of the language and actions of the character within the text that the reader is able to understand what are happening and why, without having to be told directly (i.e. indirect characterization). Although, with fiction that presents a completely new dimension of existence it may be necessary to spell out character specifics to the reader, due to the ambiguity inherent in novel texts (i.e., direct characterization). In most novels, plays, and essays, characterization develops along with the storyline and functions to support the fictional themes. Characters take time to create for an author, as they are getting to know another person, and aspects of who they are and how they interpret their world and respond to it in a way that is contingent on their values, requires the author to reflect on their own ways of thinking and behaving. A story may be completed driven by its characters; they are the key to unlocking the story. In such cases, the plot tends to come first, like a seed crystal of an idea that radiates out patterns of complexity and beauty in storylines as it creates the possibilities for characters to arise from the situations or settings (The National Library Literacy Strategy, 2001).The physical description of a character provides the reader with a general framework about the 'person': age, gender, ethnicity, physical appearance, style of dress, geo-historical location, and the way t he character moves. The reactions and responses of the character give the reader insight into the character's core values and attitudes (English Online, 1998). The dialogue of each character can provide the reader with deeper psychological insight of the character. The language that a character uses, their use of intonation, as well as use of pauses and silences, can instil in the reader the true feelings of what that character is experiencing. The surroundings enrich the background for the reader, making the characters more believable and understandable. This detail needs to incorporate all of the character's senses and perceptions of the setting. It is the author's ability to sew together the dialogue, reactions and descriptions that enables characterization to occur (The National Library Literacy Strategy, 2001). It is important that the author be aware that characters need to develop due to their fictional experiences, in order to come to life and 'be real". However, it is also essential that each character have a consistency of character as well, and it is this balance that leads the author through the characterization process.Ultimately, characterization requires the author develop characters by giving them; identity (e.g., have a name, appearance, values, temperament); creating

Interdependence and Independence Essay Example | Topics and Well Written Essays - 500 words

Interdependence and Independence - Essay Example 201). In support of the observations, people are, in the modern times, learning about becoming independent. People no longer wish to share their concerns with others. This is because they tend to create social security for their private matters. Culture is fading away slowly and gradually, it does not significantly affect the decisions made by the people. For instance, if someone has issues with their spouse, culture would dictate that they continue living together. This should not be the case as people have the right to make their own independent decisions. An individual’s needs are more important than the community’s needs. People are more important than their communities are. The community regulates the rules and regulations that involve assisting one another. The rules advocate for community coexistence, getting it wrong. People in the community should push for what is beneficial to their lives. A person cannot seek for the rights of the community at the expense of their own benefit. I will raise my children differently from the way I was raised. It is important to appreciate and respect their efforts and decisions. There is need to encourage them to become independent thinkers. This is because they must be accountable for their own decisions and actions. Parents should only provide their children with guidance, in order to have them make the right choices in life. Through independence, individuals are able to understand themselves. They realize their uniqueness and acquire the ability for self-development. Independence affects the personality of an individual positively because they act without other people’s influence. People are able to keep their thoughts and feelings as secrets, increasing their internal activity. Independence gives an individual a sense of control over their lives. It is important to listen to parents whenever they give

Intro to film Essay Example | Topics and Well Written Essays - 250 words

Intro to film - Essay Example The film has massive usage of heroic characters. The film producer used such characters for thematic and interest purpose. The film technique or usage of heroic lead characters, demonstrates the change from communist ideology to multiculturalism. A significant memory-image in the film â€Å"How Green Was My Valley Says That† occurs in the last scene of the film. In this scene, Morgan’s family is having supper as they reflect the happy moments that they spent together. The scene is also crowned by a crescendo of the film’s theme song and voices of the Morgan’s family members. A scene whereby, Angharad watch Huw and Gruffyd as they disappear into the blooming flowers on the hillside follows. The battleship Potemkin belongs to the Montage movement. This movement began in 1924 and lasted until 1930. The explicit explanation of Russian history was the main characteristic of films produced under this movement. The strong political message and soviet philosophy in the film is the main characteristic that identifies it as a montage movement’s

Structural Fesign Essay Example | Topics and Well Written Essays - 2250 words

Structural Fesign - Essay Example Structural engineers are thus very important in the construction supply chain. Structural design encompasses the design of the support structure, selection of materials, computation of the member size, evaluation of the effect of the environment on the structural elements, selection of the member types and lastly the configuration of the structure in the most effective, affordable, safe and serviceable manner (Heyman, 1999). The structural designer must work according to the building standardization codes. He may have several designs of which he selects the most affective and affordable design. The design selected must not fail. To ensure proper functionality especially in the factories, the beams must not sag as this may lead to improper functioning or derailing of the cranes. Failure of the structural members results in machines drive shaft fail, machine table misalignment and burning of the bearing due to warbling. Simply supported beams; there are supported vertically at two points. One point is fixed permanently while at the other point, an allowance is given to enable the beam to move horizontally due to expansion (Hosford, 2005). Hollow section: there are several hollow sections that are used in structural design. ... Continuous supported beams; supported at several points. There are several types of beams; these include; Universal beams; they are I shaped beams and are effective as supporting structures, they don't fail easily, they are also referred to as H section beams. Angle sections; they are 'L' shaped are mainly used for roofing where struts and ties are required to make trusses. T-sections; these are structural members that have a 'T' shape. Hollow section: there are several hollow sections that are used in structural design. These include; rectangular hollow section that have a rectangular shape, round hollow section that have a round tubular cross-section and shape, Square sections which have a square cross-section and elliptical cross-section which have an ellipse shape but are hollow inside. Trusses; they are mainly used for roofing; there are sometimes preferred in that they may span for long distances without sagging or deflecting. There are very versatile and can be redesigned easily to add more struts and ties to accommodate greater loads or span longer distances. Bars and rods; bars are rectangular while rods are circular; the are solid unlike the hollow section. Plates. Plates are metallic sheets with a thickness greater than 6mm. Concrete; One of the most widely used structural materials. It is cheap and last long as compared to all the other materials. Concrete comprise of a mix of sand, cement and aggregate in different proportions. The strength of concrete depends on the mixing ratios. Ratios with more sand and cement have greater strength and are used in industrial constructions. Nearly all concrete mixes are reinforced with steel bars. The inherent advantages of reinforcing concrete are; The composite structure resulting from the mix is more

Anthropology and Ethnic Boundary Markers Essay Example for Free

Anthropology and Ethnic Boundary Markers Essay Chapter Four: What Are The Underlying Reasons Behind Ethnic Conflict, And The Consequences Of These Conflicts? Questions 1) In what ways do you think you might experience Ethnic Conflict – on a much smaller level in your own life? Do you see it in other peoples lives? 2) Can you identify some of the Ethnic Boundary markers you see in our own culture (specifically microcultures)? Do these markers change depending where you go? Are these markers a good thing or a bad thing? What Ethnic Boundary Markers would you like to see change? 3) How fragile is our own nation? Where do you see Ethnic intolerance or Ethnocentrism ? Do you see fragments of ethnic stratification? 4) If Ethnic Conflict were to ever â€Å"break out†, in the U. S. what do you think would be the main causes specifically? 5) Place yourself in the shoes of an Anthropologist who is taking a fully emic approach to their Ethnic Conflict research. Are the hardships involved worth the benefits that could result from the research? Is â€Å"the juice worth the squeeze†? 6) Do you agree with Anthropologists who feel the need to downplay violence within Ethnic Conflict in order to help propel the idea of non-western stabilization? 7) Do you agree with Anthropologists who feel that refugee camps are â€Å"part of the problem†? 8) Do you think our world will ever see an end to Ethnic Conflict?

Development of Low Cost Microcontroller Based Spirometer

Development of Low Cost Microcontroller Based Spirometer Spirometer is an instrument which is used to measure the volume and capacity of lung. It collects the air expired by the patient to measure the lung volume or capacity. The spirometer has a device attached to it which will measure the movement of gas in and out of chest and this device is called as Spirograph. And in some spirometers spirographs are replaced by printer called Spirogram. In most of the computerized system the spirographs or the spirogram will display the predicted value next to the observed value. Using spirometer various tests are carried out to determine whether the patient is having any respiratory disorder or not.Some of the tests carried out are- Tidal Volume (TV)-The amount of air that is breathed in and out by an individual during normal respiration. Forced Vital Capacity (FVC)-The amount of air that is maximally forced out of the lung after maximum inspiration. Forced Expiratory Volume In 1sec (FEV1)- The amount of air that can be maximally forced out of the lung in the first second of forced expiratory manuever. 1.2 OBJECTIVE OF THE PROJECT To design a low cost microcontroller based spirometer and carry out the various lung functioning tests. To develop a program for the microcontroller to measure the lung volume and display the result digitally on a LCD interfaced with it. CHAPTER 2: LITERATURE SURVEY AUTHORS:  Agarwal.V ,Ramachandran N.C.S,2008,[1] TECHNIQUES USED:  The patient exhales through the mouthpiece where the gas exchange is being acquired as the voltage signal by the transducer(sensor). This signal from the sensor is amplified by an instrumentation amplifier(INA 114). Then the amplified signal is filtered using a low-pass-filter which is then given to a ADC(ADS7812) for digitisation. After digitisation it is given to the microcontroller(Intel) from which the data is displayed on the LCD screen. For further interface for communication on internet ETHERNET device is used. RESULTS:  The output voltage from the amplifier is digitised using ADC which corresponds to the pressure difference across mouthpiece is computed by the microcontroller and displayed on the LCD screen. LIMITATIONS/FUTURE VISION:  In future the system is expected to be inexpensive  medical care for thousands of patient. AUTHORS:  Nagaraja K.A,Nanda.S, 2007,[2] TECHNIQUES USED:  The patient exhales the air through the mouthpiece which consists of a flow sensor, differential pressure sensor, instrumentation amplifier,low pass filter and ADC. The flow sensor relates the velocity and the pressure of air blown if there is no air flow through the sensor the velocity is converted to pressure and this pressure difference is sensed by the difference flow sensor which inturn provide the electrical quantity of the air flow. Inorder to remove noise and amplify the signal an instrumentation amplifier is used. Which is then fed to the band pass filter of the range 0.05Hz to 1.3Hz,where the spirometer lies in the range of 0.1Hz to 12Hz. The filtered signal is digitised using ADC and this data is read by a microcontroller which is then interfaced to a computer. RESULTS:  Various tests are performed and FVC,FEV1 and their ratio are calculated and monitored.Depending on these values we determine whether its normal (or) restrictive (or) obstructive. LIMITATIONS/FUTURE VISION:  Not portable AUTHORS:  Dr.David Van Sickle et.al ,2009,[3] TECHNIQUES USED:  Initially the patient is allowed to expire through the spirometer. The spirometer consists of a pressure sensor(HW 24) which gives a DC voltage as output. This DC voltage is propotional to the pressure drop between the leads which is recorded by the spirometer. This analog data is then converted to digital using ZMD 31014 iLite chip. Microcontroller(PIC18f13k50) is used to convert the digital data to USB. Using mathematical algorithm implemented in the computer it calculates the volume and displays on the screen. RESULTS:  Graphical display of flow vs volume is evaluated and monitored from which the following values can be calculated :PEF,FVC, FEV(t) and FEV1/FVC ratio. LIMITATIONS/FUTURE VISION:  Highly expensive. AUTHORS:  Ovlyaguli et.al,2001[4] TECHNIQUES USED:  The test is performed using wedge bellow type spirometer the FVC and FEV1 data collected are investigated where the test is performed on different patient and are grouped accordingly. Then a mathematical modeling process is carried out based on fuzzy values obtained from the flow graphs. These values for the subject with COPD is compared with healthy subject belonging to same age,sex and height. Then normalized for fuzzy labels Very low,low,Normal,High,Very Highwhich is the generated on rule base and simulated. RESULTS:  Provide the interrelationship between characteristic constants obtained from the curves and degree of disease and FEV1 values are measured. LIMITATIONS/FUTURE VISION:  In future it eliminates the error factors and helps in accurate diagnosis. CHAPTER 3 RESPIRATORY DISORDER: SYMPTOMS CAUSES 3.1 RESPIRATORY DISORDER Respiratory disorder  deals with the  diseases  of the  respiratory system which include diseases of the  lung,  pleural cavity and bronchial  tube. Respiratory diseases range from mild to life-threatening such as  bacterial pneumonia  or  pulmonary embolism which may lead to illness and death. The study of respiratory disease is known as  pulmonology. A doctor who specializes in respiratory disease is known as a pulmonologist. Some of the common respiratory diseases are: Inflammatory lung disease. Obstructive lung disease. Restrictive lung disease. Pleural cavity diseases. 3.2 OBSTRUCTIVE LUNG DISEASE Obstructive lung diseases  are diseases of the lung in which the  bronchial  tubes become narrowed. COPD Two examples for obstructive lung disease are: Chronic Obstructive Pulmonary Disease (COPD) is a disease in which the airways become damaged and hence making them narrow. Asthma causes obstruction to the airflow out of the lungs.And the obstruction is reversible.   3.2.1 SYMPTOMS Persistent cough. Sputum  or mucus production. Wheezing. Chest tightness. Tiredness. 3.2.2 CAUSES Smoking. Occupational exposures. Air pollution. Genetics. Autoimmune disease. 3.3 RESITRICTIVE LUNG DISEASE Restrictive lung disease  is also known as  restrictive ventilatory which restricts the lung expansion and there by decreases the lung volume and increases work  of breathing. SYMPTOMS Shortness of breath, cough 3.3.2 CAUSES Asbestos is caused by long-term exposure to asbestos dust. Radiation fibrosis(radiation used for cancer treatment). Rheumatoid arthritis. 3.4 DIAGNOSIS OF ABNORMALITY OF RESPIRATORY SYSTEM USING FEV1/FVC RATIO In restrictive lung disease, both  FEV1  and  FVC  are reduced so the  FEV1/FVC ratio  is normal. In obstructive lung disease  FEV1  is reduced while the  FVC  is normal thus the  FEV/FVC ratio is lower CHAPTER 4: PRINCIPLE OF WORKING The spirometer consists of a turbine flow sensor containing LED(source) on one side and a photo-diode(detector) on the opposite side.Inbetween the LED and the detector there is a rotor.The rotor is a fan like structure with 3 fins.The above arrangement is present inside a cylindrical case which is opened on both the sides.The LED and the photo-diode are molded with a light weight plastic design inside the case.A mouth piece is fitted on one side and the opposite side is kept open.When the patient blows air inside the mouth piece a pressure difference is created due to the atmospheric air(atmospheric pressure) that enters from the opposite side.A power supply circuit is designed to provide power supply to the spirometer.When the patient exhales through the mouth piece the rotor rotates.Whenever the rotor is in-between the source and the detector the light from the source is not detected by the detector and when the rotor is not in-between them then the light from the source is detecte d by the detector.Each pulse will be detected only if 7ml of gas has been exhaled by the patient.These pulses are then given to the comparator which will give binary output only if the patient is exhaling.And when the patient is not exhaling there is no output from the comparator.This ouput is then given to a microcontroller which is programmed in such a way that it will count the number of pulses from the comparator and these pulses are converted into total number of rotations by dividing them(no of pulses) by 3(since the rotor has 3 fins).These rotations are then used to measure the lung volume.The lung volume is then displayed on a LCD which is interfaced with the microcontroller as digital output. CHAPTER 5:  SYSTEM DESCRIPTION 5.1 ELECTRONIC CIRCUIT 5.1.1 POWER SUPPLY CIRCUIT A 12V and a 5V power supply circuit was implemented. 5.1.1.1 IC 7812 IC 7805 The two ICs are used to provide 12V and 5V supply respectively. 12V from IC7812 is given to the turbine flow sensor. 5V from IC7805 is given to LM324 Microcontroller. 5.1.1.2 STEP-DOWN TRANSFORMER Transformer being used is a 230V-step down transformer. It converts AC to AC without any change in frequency. BRIDGE RECTIFIER The diode used is IN4007 which acts as bridge rectifier and converts the given AC current to DC. 5.1.2 SENSOR The sensor used here is FT-330 Turbine flow sensor.The input to the sensor is the air blown by the patient. 5.1.2.1 FEATURES Can withstand temperature upto 80 degree celcius. Molded with electronics and a light weight plastic design. 5.1.2.2 ADVANTAGES Highly accurate. Very compact. Reliable. 5.1.2.3 POTENTIAL DIVIDER AND ZENER DIODE The output of the turbine flow sensor is given to the potential divider. The potential divider will reduce 12V from the turbine flow sensor and allows a reduced voltage to zener diode. The zener diode is used to fix a threshold i.e it allows only voltage within 5V to the comparator. 5.1.2.4 COMPARATOR LM324 acts as a comparator which gives a voltage within 5V(square wave) when the patient exhales through the sensor. And when the patient does not exhale, the comparator output gets reduced to 0V.The output of the comparator is given to the microcontroller. 5.1.2.4.1 FEATURES Internally frequency compensated for unity gain. Large DC voltage gain of 100 dB. Wide bandwidth (unity gain) 1 MHZ. Wide power supply range: Single supply 3V to 32Vor dual supplies  ±1.5V to  ±16V. 5.1.2.4.2 ADVANTAGES Eliminates need for dual supplies. Four internally compensated op amps in a single package. Power drain suitable for battery operation. 5.1.3 MICROCONTROLLER The microcontroller used here is 16F877A. The microcontroller receives input from LM324. The microcontroller is programmed in such a way that it will count the number of pulses from the comparator and these pulses are converted into total number of rotations by dividing them(no of pulses) by 3(since the rotor has 3 fins).These rotations are then used to measure the lung volume(TV,FVC,FEV1). 5.1.3.1 FEATURES RAM=368 bytes EEPROM=256bytes PROGRAM MEMORY=8Kilo bytes I/O PINS=33 5.1.3.2 ADVANTAGES This IC can be reprogrammed and erased up to 10,000 times. It is very cheap. It can also be very easily assembled. Additional components needed to make this IC work is a 5V power supply , 20MHz crystal oscillator and two 22pF capacitors. 5.1.3.3 LCD DISPLAY The output(TV,FVC,FEV1)from the microcontroller is displayed on the LCD according to the program. 5.2 MECHNICAL DESIGN( MATERIALS USED): 5.2.1.TURBINE FLOW SENSOR 5.2.1.1 MODEL FT-330 Turbine flow sensor 5.2.1.2 ADVANTAGE Highly accurate, compact and reliable. 5.2.1.3 FEATURES Can withstand temperature upto 80 degree celcius. Molded with electronics and a light weight plastic design. 5.2.2. MOUTH PIECE Made up of plastic with a diameter of 2cm. CHAPTER 6:  CIRCUIT DESCRIPTION 6.1 OVERVIEW OF CIRCUIT WORKING Initially the patient is allowed to blow through the sensor and the output voltage from the sensor is given as input to the potential divider circuit which limits the current to zener diode and which inturn reduces 12V supply from the potential divider o/p and allows only 5V to be given to the inverting terminal of LM324(comparator). Reference voltage is given to pin 3 which gets the feedback from LM324 output. Hence when the patient doesnt blow, a high voltage is received by pin 2(inverting terminal) which is compared with the reference voltage and in this case the i/p voltage >reference voltage and hence we get a low voltage(0V) at the output and no pulse is seen and when the patient blows, i/p voltage CHAPTER 7:  EXPERIMENTAL STUDY 7.1 ALGORITHM Initialize the count to 0. When the patient exhales, the number of pulses from LM324 will be counted i.e.; the count gets incremented. This count is converted into rotations since the rotor has 3 fins, if we get 3 pulse, it is considered as 1 rotation. So by dividing the count by 3 we will get the total number of rotations. The LM324 will give 1 pulse only if 7 ml of gas is exhaled . So the total number of rotations is multiplied by 7 to obtain the lung volume. Initially the flag will be 0.When the patient exhales TV will be displayed. When the reset is done the flag will be 1.Now when the patient exhales FVC will be displayed. When the reset is done again the flag will be 2.Now when the patient exhales FEV1 will be displayed .Again when the reset is done and the patient exhales then TV will be displayed. 7.2 INFERENCE Thus the tests results obtained from the designed spirometer matches with the tests results obtained from the laboratory spirometer. Minor differences in the value is due to effect of surrounding environment and moving air. CHAPTER 8:  CONCLUSION The objective of the project was to design a low cost spirometer for the rural health care centers,private clinicians and primary function laboratories.In order to substantiate the objective of our work, we compared the market price of currently available spirometer(MIR SpiroDoc Spirometer),the starting price of which is around $1974.50. Thus the tests results of four subjects obtained from the designed spirometer was compared with the tests results obtained from HELIOS Pulmonary Function test.The values had some minor differences due to effect of surrounding environment and moving air.But they were of acceptable accuracy.Future work involves interfacing the device with PC and implementation of the product in Telemedicine application for distance monitoring of respiratory parameter. APPENDIX 1 1.1 PIN CONFIGURATION OF LM324(COMPARATOR) Fig 1.1 Ref:www.voltage current.info 1.2 PIN CONFIGURATION OF PIC16F877A Fig 1.2 Ref:http://www.best-microcontroller-projects.com/schematic.drawing-program.html 1.3 OVERVIEW OF PIC 16F877A Fig 1.3 Ref:http://www.best-microcontroller-projects.com/schematic.drawing-program.html

Holocaust Rememberance Day :: Free Essays

Then they came for me - and there was no one left to speak for me.   Ã‚  Ã‚  Ã‚  Ã‚  We’ve been taught that it is important to know history so that we can understand and learn from past mistakes and avoid repeating them in the future. On May 2nd, millions of people worldwide will remember the victims of the Holocaust as we observe the Holocaust Remembrance Day.   Ã‚  Ã‚  Ã‚  Ã‚  Holocaust is the term that refers to the tragedy of the World War II, specifically the ethnic cleansing carried out by the Nazis. Counting around 11 million deaths, it is undoubtedly one of the most horrendous crimes committed against humanity. Holocaust encompasses the time period from 1938 to 1945; its victims range from Jews to physically disabled. Singled out as the primary target, the Jewish people suffered around 6 million deaths during the Holocaust, that being nearly 65% of European Jewry. However, they were not the only ones.   Ã‚  Ã‚  Ã‚  Ã‚  Germans sought to really â€Å"cleanse† the human race. They targeted all the people who were somehow different from their â€Å"norms†. 5 million people other than Jews were killed during the Holocaust; these included homosexuals, gypsies, disabled, Jehova’s witnesses and Polish people, the list goes on and on. Asides from all the deaths, Nazis are famous for notorious experiments that they performed on â€Å"lower† races in and outside of their concentration camps. They tore apart families, often making parents watch their children being escorted to the gas chambers. 11 million people fled during the Holocaust, imagine how many lost their families.   Ã‚  Ã‚  Ã‚  Ã‚  On May 2nd you will see black tablecloths and burning candles on them. You can also see some movies and statistics. When you do see this, stop for just a second and think about those 11 million. If anything good can ever come out of the Holocaust, let it be the lesson for future generations. This lesson can be summarized in words of Martin Niemoller, an anti-Nazi German

Essay --

â€Å"The Judge’s Wife† a short story written by Isabel Allende presents many of the necessary techniques required to write an effective short story. Alledende’s keen use of setting, character development, and point of view dramatically affect the way the reader perceives the story during crucial turning points throughout the story. Alledende uses these devices to make the theme of fate being inescapable, no matter how hard on tries to avoid it. setting, character development, and point of view play a vital role within the story and without them it would be impossible to fully understand the story. In The Judge's Wife Nicolas Vidal is the main character. He was born a fatherless to a prostitute and was foretold at birth that he would lose his head to a woman. Keeping this in mind, he hardened his heart to allow no woman to come close to him emotionally. As Vindal grew up he became an outlaw and leader of a gang. On the wedding day of Judge Hidalgo, Vidal looks down on the judge’s bride, Casilda, and is not impressed. Vidal's gang have been plaguing the judge’s jurisdiction as well as surrounding areas despite the numerous attempts to stop Vindal. To solve this problem judge Hidalgo set a trap by caging Vidal's mother in the town square surrounded by guards. The judge believes that Vidal will come to rescue his mother, but after three days it is clear that he is not going to fall for the judge's trap. Vidal's mother hangs herself out of embarrassment that her son did not come to save her. As a result, Vidal hunts down Hidalgo. During Hidalgo's escape he suffers a h eart attack loses control of his car and dies. Only his wife and kids survive. Casilda hides her children in the nearby caves for safety as she awaits Vidal's gang, with the i... ... also allows for deeper plot development with the characters back stories and ties two seemingly unrelated events into one flowing story removing the need to use in medias res. The shared point of view is extreamly important in connecting the story with the theme and allows for the reader to pick up on the foreshadowing and irony present throughout the story. â€Å"The Judge’s Wife† is not a long story, but in those few pages Allende creates a piece readers can understand to the point of empathy. Throughout the piece the use of theme, setting and character development make this story effective in developing a deep story in a small amount of time. Allende does an excellent job of writing a short story. Even though the story lacks symbolism it makes up for that lacking by making effective use of setting to really pull the story together and develop the story completely.

RFID Tagging :: essays research papers

RFID, which is radio frequency identification, uses tiny tags that contain a processor and an antenna and can communicate with a detecting device. RFID is intended to have many applications with supply chain and inventory control to be the drivers of utilization. RFID has been around for a long time. During World War II, RFIDs were used to identify friendly aircraft. Today, they are used in wireless systems, for example, the E-Z passes you see on the turnpikes. The major problem until recently has been cost for RFIDs. Tags have been at a cost of 50 cents, which makes it hard to utilize or really unusable for low priced items. A company based out of California called Alien Technology has invented tags for less than 10 cents a piece on large mass runs. The major benefit expected from RFID is its potential for revolutionizing the supply chain management, but RFID could have many applications, ranging from payment collections on highways, to finding lost kids in amusement parks, to prev enting cell phones from being stolen.   Ã‚  Ã‚  Ã‚  Ã‚  The RFID tag itself is about the size of a pinhead or grain of sand. The tag includes an antenna and a chip that contains an electronic product code. Industry professionals expect the RFID tag to eventually replace the barcode as identification system of choice. The electronic product code stores much more information than a regular bar code that is capable of storing information like when and where the product was made, where the components come from, and when they might perish. Unlike barcodes, which needs a line-of-sight to be read, RFIDs do not need a line-of-sight. There are two types of RFID tags call active and passive. An active tag uses its own battery power to contact the reader. It works greater distance than passive tags, but has a drawback because of the larger size. A passive tag does not require a battery, but it derives its power from the electromagnetic field created by the signal from the RFID reader. This generates enough power for the tag to re spond to the reader with its information, while the range is smaller than active tags, having no battery make the tags useful life almost unlimited and the size much smaller than active tags. In any event, the key feature of the technology is the ability for an RFID-tagged object to be tracked instantly from anywhere in the world, provided that the reader is in range.

A Chronicle of the Plague

The Black Death: A Chronicle of the Plague by Johannes Nohl (1882–1963) is an illustrative book that traces down the flux of plague and its effects in Europe over the centuries. It examines this malady from historical and sociological perspective. The major contribution of Johannes Nohl is that he does not rely on secondary sources but has researched the contemporary chronicles to locate the pathos and miseries that this epidemic afflicted on the populations of Europe over the centuries.Scope of work is both intensive and extensive as he has provided an in-depth study that encompasses four centuries (1337-1720) and a vast geographical area from Western Europe to Russia and from Nordic ice-burgs to the Mediterranean Sea. In addition to being a historian, Johannes Nohl was also a psychoanalyst. So The Black Death: A Chronicle of the Plague is not a mere chronicle of the plague & its effects but also it further analyzes the socio-cultural, psychological and economic effects of th is epidemics on the whole European civilization that persist in certain societies hitherto.It beautifully blends the comprehensive accounts of the pandemic that caused almost 40 million deaths a single century during the fourteenth century alone with durable socio-cultural impact. The book also locates that how people countered these epidemics and what practical measures were adopted to tackle the problem at large scale. Nohl illustrate that Black Death changed the patterns of life and affected all facets of culture as people migrated from one geographical location to the other to escape themselves from this epidemic.First two chapters, The Aspect of the Plague and The Precursors of the Plague describe the nature of plague as it was understood by the contemporary societies. Nohl has explored through contemporary chronicles that Plague was considered a celestial phenomenon as plague use to visit the European societies sporadically in the form of a natural disaster. Furthermore, Nohl explores that most usual route of these epidemics were from India to Central Asia and then to Europe through trade groups and in Europe it used to spread along with waterways in the shape of a natural catastrophe.In the next two chapters The Medical Profession and Plague Remedies, Nohl discovers the available medical remedies in the medieval societies and how medical professionals reacted to it. Contemporary chironicles suggest that mostly people used to rely on religious conviction and pilgrimages rather than visiting a doctor. Most medical treatment was based on plant extracts. Availability and affordability of medicines were another problem due to mass scale spread and impact of the disease. Nohl looks into the various other socio-political aspects of the epidemic.For example, aadministrative precautions mostly included individual and group exclusion from the community of the hale and hearty. A systematic effort in this regards was not possible as plague used to erupt abruptly, s o it was administered intermittently. Nohl has not only provided the official and royal manuscripts and chronicles but to present the conditions and miseries of the general public, he has included chronicles of travelers, contemporary historians. These clearly manifest that plague had different effects of different social classes and each class was treated in a different way both socially and administratively.In addition to socio-cultural and political effects, epidemic of plague had cast their disturbing impact on the worldview Christian community. Church responded in its own way to the pandemic. The Church labeled it as a reaction of sins and their only remedy was ritualistic deliverance that would purge the sins. So ritualistic practices were used to organize at the individual and collective level. Some other Christian followers were of the view that world is overtaken by the evil as Divinity itself was a friend of mankind and how it could afflict it with such pathos and miseries .Another section of orthodox sect, The Luciferians were of the view that God had toppled down Lucifer, their lord, and had taken over heaven. So this is a natural response of this tragedy. (Nohl 1924, 161-163). Some other compared the disease as an Arial and celestial phenomenon that was beyond the strength and capacity of mankind. This view was further reinforced by the fact that prior to the Black Death, in 1117, the eruption of plague was coincided with a cosmic phenomenon that medieval mind was unable to comprehend. Nohl states in this regard thatIn 1117, in January, a comet passed like a fiery army from North toward the orient, the moon was o’ercast blood-red in an eclipse, a year later a light appeared more brilliant than the sun,. This was followed by great cold, famine and plague, of which one-third of the humanity have said to have perished. Nohl further describes same coincidences in 1568, 1582 and 1606 when Netherlands, Prague and Vienna were badly affected with pl ague. This shaped the general mentality that plague is an extra human phenomenon and mankind had no control over it. The social fabric of the whole European society was transformed by these notions and beliefs.Nohl depicts that beside human causalities, first social causality was breakdown of social order. There was â€Å"an incapacity to believe that so uncanny a disease as the plague could be attributable to natural causes† which led â€Å"the fateful misconception of [its] artificial production† (Nohl 171). This belief molded their worldview and they become more recluse and a believers in the fictitious remedial rituals. Nohl also illustrates an interesting but tragic fact that plague was intentionally passed on to others. He located the motive for this deliberate infection as infectants did not want to undergo the agonies alone.Furthermore, it was common belief that one could liberate oneself of his contagion by transmitting it to others (Nohl 171). Nohl also provi des evidences when someone infected his/her rival or enemy due to sheer malice and enmity. Sometime, Lutherans were blamed for this curse but more often Jews were labeled as propellants of this deadly disease. So they were persecuted on mass level to purge the society from this malady but it is a fact that Jews used running streams for their sanitary purposes unlike Christian who used contaminated public wells that were often a prime cause for dispersal of various diseases.Toward end, the book has an interesting chapter, The Erotic Element in the Plague that relation sexuality with deadly disease. This book covers all aspects of Black Death pertaining to the contemporary medieval societies and all these are supported with the contemporary chronicles. It not only provides a synopsis of whole epidemic history but provides an in-depth analysis of the entire phenomenon. References Nohl, Johannes. 1924. The Black Death: A Chronicle of the Plague. Translated by C. H. Clarke. New York: Har per and Brothers Publishers.

Common stock Essay

A1a. During the 12% bonds review the earnings per share common stock out totaled .103. The total was not enough to maximize the shareholders return. It was observed that the interest on the bonds would put them at $72,000. The interest on bonds was very high and could have contributed to the lower total figure. The common stock shares outstanding were at $975,000; which was a very low number. Compared to all the totals the 12% option had the lowest shares issued. During the 20% bonds review they totaled the earnings per common stock share at .197. This stock option was the second highest to the chosen 50% stock option. It looks like the 20% bond option was lower due to using $120,000 in bonds and $480,000 in common stock. The 40% bond option had earnings per common stock share of .181. The ending total wasn’t too bad but it wasn’t enough to maximize the shareholders return. The company acquiring $240,00 in bonds and $360,00 in common stock played a role why the figures went good enough to increase shareholders return. The 60% bond option had earnings per common stock share at .160. The $43,200 interest on bonds could have affected the earnings total. The income before tax and the tax income was a contributing factor to lower figures and results in the net income category. A2. Competition Bikes needs to analyze their capital budgeting. Businesses should acquire investments that are going to bring in more revenue but they have to make sure for the long term the investment is worth taking on. The cash inflows and outflows have to be looked at to determine what is best for the company. The company needs to see potential during the capital budget stage. In the story line management  decided that the most reliable data for a capital budgeting analysis is to estimate the number of product sales using the U.S. pricing and cost data. It is anticipated †¨that costs will be consistent in the new Canadian location. Net present value is capital budgeting used to examine the success with of a investment or project by using the present value of cash flowing in and the present value of the cash flowing out. It is used to determine profitability. It is a tool for management to see if the investment will bring value to their company. Projects and investments should only be taken on if the total number is positive or at 0. The company had a low net present value of -26,740 and the moderate net present value of 2,243. The sales forecasting indicates a range of outcomes as indicated by a low forecast and a moderate forecast of results. The recommendation would be for Competition Bikes to not take on the Canadian investment. Based of the low and moderate numbers if they are split in half they would still be in the negative. It is suggested if the net present value is not a positive number a company should not take on the investment or project. Internal rate of return is the rate of growth projected for t he investment or project. The story line advises Competition Bikes, Inc. requires a 10% return on capital (hurdle rate) to pursue a capital investment. The internal rate of return for the low demand was 8.7% and the moderate demand cash flow was 10.1%. The higher rate of IRR the more likely the company will generate a greater return. The recommendation for internal rate of return is for the company to take on the Canadian investment. A3. Working capital consists of current assets minus the current liabilities, it is the money left over to pay for the day-to day activities to run a company. It is an indicator of how many short assets they have to be able to pay off their short-term debt. If the working capital ratio is less than 1 the company has a negative working capital. A company should always want to be in above 1 for positive results. The current assets can be monitored daily or weekly to keep a close eye on the incoming cash flow to the account. Obtaining Working Capital Competition Bikes needs to obtain working capital quickly. The storyline suggests the cost to build the manufacturing facility is expected to be $400,000. (All figures are in US$) Working capital of $200,000 will also be necessary to support the operation. These two items have been considered as  the total investment in the capital structure analysis. They need to come up with $200,000 for the expansion operation. Competition Bikes can get a line of credit from a bank to obtain working capital quickly. They will need to negotiate the terms and amount of time they will be doing with the bank for the loan. Once they receive the payments in their accounts receivables they then need to turn around and the pay the loan down. They can consider getting a business cash advance to obtain working capital. Business advance loans have a quicker turn around time to receive the funds than a traditional bank loan. Most of the time the payment options are flexible depending on the companies specific needs. Competitions Bikes can go with a business advance loan normally receive a lower rate with fixed payments. Managing Working Capital They need to re-evaluate their account receivables procedures. They are taking almost 44 days to receive payment, they need to decrease their days to right around 30 for collecting payment. They may need to consider discounting to the customers that are paying the money on time. The company needs to consider charging penalty fees for accounts they are outstanding. Managing account payables is another way to manage working capital. They need to keep a good relationship with their suppliers. When picking suppliers payment and the terms of the contract need to be the number one priority. Paying the supplier on time and keeping an open line of communication is the key to managing the accounts payable. They also need to re-evaluate how inventory is handled to properly manage their working capital. The inventory and purchasing has to be reviewed to make sure they are bringing in the correct and defect free products and keeping track of them. They need to develop the first in first out method. They need to use the inventory longer that they had the longest. They need a security plan in place to make sure the inventory is accounted for and locked in a safe facility. Lease vs. Buy Competition Bikes has to make the decision whether they will lease a facility or whether they will buy in the Canadian expansion. For the leasing option the storyline advises 5 year lease financing has been offered at 6%. No down payment is required with this option but the $200,000 working capital must  still be internally funded. The leasing company would buy the building outright and then accept five $90,000 lease payments over 5 years. A $50,000 buyout option would be included so Competition Bikes, Inc. could choose to keep the location at the end of the five-year lease. To the lease the facility it will cost $283,752 after call calculations are done. They also have the option of buying an existing facility. The storyline advised Competition Bikes, Inc. found a suitable existing facility it could buy outright for $400,000 using one of the options from the capital structure analysis. The lenders require a $50,000 down payment. The working capital requirements and down payment must be internally funded. The purchasing option totaled the company out at $399,774. If the facility is purchased they had to factor in an $18,000 operational cost. In the story is stated the depreciation on the new asset will be based on a 10-year life. The building is expected †¨to have $200,000 value at the end of the ten years. The after cash flows of 80,439 at year 9, 81,743 at year 10, 83,125 at year 11, 84,590 at year 12, and 86,143 at year 13 all factored into the after cash flow. The tax rate of 35% goal is to preserve working capital. The leasing option is going to be less money and a better option for having a positive working capital. Merger vs. Acquisition A merger is when two companies mutually agree to become one company. They will them form one completely new company. If the merger they can offer a better robust product line. With the merger they also can bring in and appeal to a wider customer base than being just one company. The potential for increased revenue is an advantage to merging two companies. A merger can bring a better research and development element to the new company. The cons of a company merger can be increased prices. If there is less competition in the market and one company having monopoly power they can make consumers pay higher prices. A company merger can also lead to job losses for staff at both companies depending on the new business needs. The storyline suggests in a merged company the Canadian Bikes, Inc. shares will be exchanged for Competition Bikes, Inc. shares on a 3:1 basis. During the merger in year 8 for available common stock for Competition Bikes will have 31,286 while Canadian Bikes will have 24 ,200. After the merger Competition Bikes will 975,000 of the shares plus 1/3 of Canadian Bikes 200,000 shares outstanding. The earnings per share before the merger was .032 and after the merger the earnings would be .053; which is a .21 increase. The merger will increase shareholder value. An acquisition is when one company buys another company by taking over most or all of it. During an acquisition one company will consume total control over the other. The parent company will acquire or absorb a second company to further their businesses goal of market domination. An acquisition will give the parent company more market power and financial increase. During an acquisition they can also run into some challenges. A company can run into difficulties integrating two different companies and having them on the same page. Acquiring another can sometime be pricy. A lot of capital has to be raised before company negotiations can begin. The story advises Competition Bikes, Inc. has the option to acquire Canadian Bikes, Inc. at an offer price 30% above the Year 8 ending share price. If Canadian Bikes is acquired Competition bikes will have to pay $286,000 to acquire Canadian Bikes. The net present value of the acquisition would be -73,862, that number came from taking 212,138 of the present value and subtracting 286,000 of the offer price Competition Bikes would have to pay Canadian Bikes in the acquisition. Based off the statistical figures the final recommendation would be for Competition Bikes to merge with Canadian Bikes rather than acquiring them. The merger had a .021 increase in earnings per share while the acquisition would have Competition Bikes at a -73,862 in net present value. Net present value needs to be a positive number for a company to consider taking on a new investment.

Experiment 5, Preparation of Synthetic Banana Oil

September 30, 2012 Experiment 5, Preparation of Synthetic Banana Oil Introduction: This experiment prepares synthetic banana oil (isopentyl acetate) through the Fisher esterification method by combining isopentyl alcohol with acetic and sulfuric acid then heating the mixture under reflux for an hour. Esterification is a chemical reaction in which two reactants (an alcohol and an acid) form an ester as the reaction product. Observations and Data: When the sulfuric acid was combined with the isopentyl alcohol and acetic acid, the mixture turned red (due to residue of another chemical remaining on glassware).During the wash of the organic layer, two distinct layers appeared, a yellow and a clear. The drying process took around 20 minutes through gravity filtration. The distillation process took around 15 to 20 minutes to begin boiling at 137? C and stay at 140? C for the remainder of distillation. After reaching optimum temperature distillation was complete within ten minutes. After the experiment was completed the final product was 97% ester, 3% alcohol. Compound| Percent Total| Isopentyl Acetate (Ester)| 97%|Isopentyl Alcohol (Alcohol)| 3%| Results and Discussion We began with 16. 2 mL of isopentyl alcohol and continued through the processes of reaction, separation, and purification until a final product was achieved. There were two peak areas appearing on the gas chromatogram, isopentyl alcohol and isopentyl acetate. The area of isopentyl alcohol (2) is 0. 255cm2 where the area of the isopentyl acetate (1) is 8. 4cm2. This results in the percentage of isopentyl alcohol (3) in the final product eing 3% and the percentage of isopentyl acetate (4) 97%. The percent yield (5)of isopentyl acetate is also 97%. 1 1 1. 1. 8. 4 cm2 isopentyl acetate 8. 4 cm2 isopentyl acetate = = 2 2 (2 cm x 8. 4 cm) (2 cm x 8. 4 cm) = = 2 2 1 1 2. 2. 0. 255 cm2 isopentyl alcohol 0. 255 cm2 isopentyl alcohol (1. 7 cm x 0. 3 cm) (1. 7 cm x 0. 3 cm) 0. 255 cm2 isopentyl alcohol 0. 255 cm2 isopentyl alcohol 3% isopentyl alcohol 3% isopentyl alcohol = = 8. 655 cm2 total 8. 655 cm2 total X X 100% 100% 3. 3. 8. 4 cm2 isopentyl acetate 8. cm2 isopentyl acetate 8. 655 cm2 total 8. 655 cm2 total = = 97% isopentyl acetate 97% isopentyl acetate X X 100% 100% 4. 4. .97 actual isopentyl acetate .97 actual isopentyl acetate = = 97% yield 97% yield 1. 0 theorhetical isopentyl acetate 1. 0 theorhetical isopentyl acetate X X 100% 100% 5. 5. The results are not ideal, because the mixture would be 100% isopentyl acetate rather than containing isopentyl alcohol. Errors could have occurred in the beginning when the initial solution turned red, due to improper glassware cleaning.Product could have been lost or improperly filtered during gravity filtration. During the transfer of product from many vials, there may have been contamination. In the drying process, enough time may not have elapsed for the entire drying to occur. Experimental Isopentyl alcohol (150mmol) was mixed with acetic acid (17mL) and sulfuric acid (1mL). The solution was then heated under reflux for one hour. The mixture was then transferred into a separatory funnel and washed with 50-mL of water, drained and rewashed twice with 5% sodium bicarbonate.The layers were separated into two containers, one containing the aqueous layers of acetic acid and sulfuric acid in water and one containing the organic layer of isopentyl acetate and isopentyl alcohol. The mixture was then dried with magnesium sulfate. After dry, distillation occurred at 140? C to remove isopentyl alcohol leaving a final product of only isopentyl acetate. Laboratory Notebook Reference The data from the experiment â€Å"Preparation of Synthetic Banana Oil† is located on pages six through nine in the laboratory notebook.

Pathogenesis of Fluid Volume Excess in an Acute Exacerbation Chronic Heart Failure Patient Essay

Heart failure is a clinical syndrome of decreased tolerance and fluid retention due to structural heart disease. Despite much advancement in treatment of the treatment of heart failure, there still exists a high annual mortality. In normal situations, an increase in total blood volume results in an increase in renal levels of sodium and water excretion. These renal excretions are due to reflexes that help maintain normal body volume in increase of atrial pressure. Thus any atrial pressure increase results to a decreased release of antidiuretic hormone, an increased release of atrial natriuretic peptide and a decreased renal sympathetic tone. In contrast, when a patient has an acute exacerbation of chronic heart failure, the total blood volume does not affect renal excretion of sodium and water. Rather, due to either decreased or increased cardiac output, underfilling of the arterial circulation and systemic arterial vasodilation occurs. To compensate the change, total blood volume is increased by the expansion of blood volume in the venous circulation and the increased after-load (systemic vascular resistance). This results in an acute increase in left ventricular end-diastolic pressure. Pulmonary venous pressure and the acute increase in left ventricular end-diastolic leads to increased alveoli pressure which results to pulmonary congestion when the alveoli cells are overwhelmed. Further, the stimulated normal reflexes, as a result of increased atrial pressure, are affected by reflexes initiated in the high pressure arterial circulation. For example, renin-angiotensin-aldosterone system is activated by increased arterial pressure to release angiotensin II. Angiotensin II acts to help in reabsorption of sodium in the proximal tubules. Glomerular filtration rate and excretion of water and sodium is also increased. This, however, is affected in acute heart failure by renal vasoconstriction and a reduction of sodium delivery to the distal nephron. Resulting in the release of arginine vasopressin, as a result of arterial undefilling, which increases plasma and urine osmolalities and leading to peripheral arterial vasoconstriction and water reabsorption in the cells of the distal tubule and collecting duct in the kidney, promoting hyponatremia. The Nitroglycerin and Angiotensin II receptor blockers strategies as Nursing strategies used to manage pulmonary oedema. Pulmonary oedema is the accumulation of excess watery fluids in the air sacs of the lungs and a common result of heart failure. The main objective in managing pulmonary oedema is to improve oxygenation and reduce pulmonary congestion. Two of the several managing strategies are use of Nitroglycerin (NTG) and Angiotensin II receptor blockers. Nitroglycerin Nitroglycerin (NTG) is an effective, predictable and rapidly-acting medication used for preload reduction. According to Sovari 2012, several studies have demonstrated the efficacy, safety and faster action onset of NTG than of furosemide or morphine sulfate. NTG can be sublingual, topical or intravenous. Sublingual is associated with preload reduction within 5 minutes and with some afterload reduction. Topical NTG, although as effective as sublingual NTG, should be avoided in patients with severe left ventricular failure because of poor skin perfusion thus poor absorption. Intravenous NTG is an excellent monotherapy for patients with severe cardiogenic pulmonary oedema. It can be started with 10mcg/min and then rapidly uptitrated to more than100mcg/min. It can be given as 3 mg boluses every 5 minutes (Sovari, 2012). The short half-life of nitrates justifies the high dosage for cardiogenic pulmonary oedema, especially with patients presenting a hyperadrenergic state and moderately elevated blood pressure. Nitrates, however, should be avoided in hypotensive patients and used with caution in cases of aortic stenosis and pulmonary hypertension. Angiotensin II Receptor Blockers Angiotensin II receptor blockers (ARBs) have comparable beneficial effects in heart failure. Studies have proposed a role for ARBs in preventing structural and electrical remodeling of the heart which reduced incidence of arrhuthmias. The Valsartan Heart Failure Trial showed that valsartan reduces the incidence of atrial fibrillation by 37% (Sovari, 2012). The Mechanism of Furosemide Furosemide is a potent diuretic (water pill) that is used to eliminate water and salt from the body. Implications of administering Furosemide to a patient with an acute exacerbation of chronic heart Furosemide is often given in conjunction with a potassium supplement or a potassium-sparing diuretic to counteract potassium loss. The medication has a rapid onset of effect of about one hour when taken orally and five minutes by injection. Duration of action is about six hours so it is possible to use a twice daily dose if necessary. References Adams, K. F., Jr Fonarow,G.C.,Emerman,C.L. (2005). ADHERE Scientific Advisory Committee and Investigators. Characteristics and outcomes of patients hospitalized for heart failure in the United States: rationale, design, and preliminary observations from the first 100000 cases in the Acute Decompensated Heart Failure National Registry Am Heart J, 149, 209-216. ADDIN EN.REFLIST Albert, N. M. (2012). Fluid Management Strategies in Heart Failure. American Association of Critical-Care Nurses, 32(2). ADDIN EN.REFLIST Cadnapaphornchai, M. A., Gurevich,A.K,Weinberger,H.D, Schrier,R.W. (2001). Pathophysiology of sodium and water retention in heart failure. Cardiology, 96, 122-131. Cotter, G., Felker,M.,Adams,K.F.,Milo-Cotter,O.,O’Connor,C.M. (2008). The pathophysiology of acute heart failure-is it all about fluid accumulation? Am Heart J, 155(1), 9-18. Nesto, R. W., DAVID BELL, ROBERT O. BONOW, VIVIAN FONSECA, SCOTT M. GRUNDY, EDWARD S. HORTON, et al. (JANUARY 2004). Thiazolidinedione Use, Fluid Retention,and Congestive Heart Failure. DIABETES CARE, 27(1). Packer, M., Coats,A.J.,Fowler,M.B.,. (2001). for the Carvedilol Prospective Randomized Cumulative Survival Study Group. Effect of carvedilol on survival in severe chronic heart failure. N Engl J Med, 344, 1651-1658. Sovari, A. (2012, February 1). Cardiogenic Pulmonary Edema  Treatment & Management. Retrieved September 17, 2014, from http://emedicine.medscape.com/article/157452-treatment#aw2aab6b6b3 WHO. (October 2013). Model List of EssentialMedicines†. World Health Organization. Source document

Case study Coursework Example | Topics and Well Written Essays - 3500 words

Case study - Coursework Example This could mean that bundle packages can be drafted in within the Furnishings for You so that the customers can be enticed into coming into the stores and checking out for their own selves as to what exactly they would require. This would attract them immensely well and ask of them to be on their feet at all times whenever there is a new deal or package in the stores. The aims and objectives of the promotional activity should always bank upon the aspects related with understanding where anomalies exist within such measures and how these could be made substantially better in order to produce results that Furnishings for You can eventually enjoy. The promotional activities that Furnishings for You must undertake should focus on giving something of value because it is much needed on the part of the customers who might not purchase something quite easily as compared to how the same came about when economic downturn had not set in within the geographical zones. There is a vast amount of d ifference now to what was experienced by Furnishings for You in the past and the role of Furnishings for You in such a situation is to extend itself to make sure that it is listening to the customer requirements and doing its best to win them back from time to time. The marketing communication or promotional mix tools which can be employed for the sake of Furnishings for You would rely specifically on bringing the customers back to the stores and ensuring that they purchase furniture at the same time. If they come back to the stores, this is indeed half the job done and hence focus should be on these tangents as far as the marketing communication and promotional mix tools are concerned. Indeed these will employ the usage of advertising, personal selling, sales promotions, direct marketing and a bit of public relations entities. Also the

Managing and accounting for financial resources Essay

Managing and accounting for financial resources - Essay Example There are two types of financial resources, namely short term financial resources and long term financial resources. 1. Bank advances - The most important source of financing is bank advances. The banks seek security either in the form of hypothecation or in the form of pledge for providing financial assistance, for providing: Revolving Credit - Revolving credit is a special alternative banking system designed for the farmers and other unorganized segments of the society. It is a running overdraft facility offered by the bank to the customers against their anticipated gross income compulsorily to be flowed into the Bank. Purchase/discount of Bills - A bill arises out of a trade transaction. The seller of goods draws the bill on the purchaser. On acceptance of the bill by the purchaser, the seller offers it to the bank for discount/ purchase. The bank will give finance to the seller and collect the amount from the purchaser on the due date. Bankers’ acceptance - A bankers acceptance (BA) is an order to pay a sum of money at a certain date. The BA is created by a banking customer and provided to a third party. The third party presents the BA to the bank. When the bank "accepts" the BA, it is assuming responsibility to make the specified payment. The bank will assume risk as well as provide finance only in direct form of financial assistance. Banks also provide indirect assistance in the form of ‘Letter of credit’. A letter of credit is an arrangement whereby the bank helps its customer to obtain credit from the customer’s suppliers. The bank, by opening a letter of credit, undertakes the responsibility to honour the obligation of its customer in case the customer fails to do so. 2. Supplier Credit term - This is a spontaneous source of finance which is extended by the supplier of goods or services without any specific negotiations. It is given on account of the

Fathers need to be as involved in their children's lives as mother are Essay

Fathers need to be as involved in their children's lives as mother are - Essay Example Fathers should be involved in their children’s lives just as much as their mothers are because fathers offer different skill sets than mothers, children receive a much improved childhood, and fathers good set a good example for their children. One reason why fathers need to play an equal role, in conjunction with their wives, in their children’s lives is that they have certain characteristics that cannot be replicated by mothers. In single-parent households, mothers are generally left to pick up the slack left behind by an absent father. That is not to say that a mother cannot fill the gap of a missing father, but each parent has specific roles that must be performed by them. While mothers are generally left to enforce the rules that children must live by, it is the responsibility of fathers to set these rules and then meter out the appropriate punishment if these rules happened to be broken. For a mother to perform all three of these actions is perhaps too much. Childr en would feel like they were getting singled out for nothing. It is for this reason that fathers often command more respect that mothers do. This is because children instinctively know that fathers are the ones in charge and that the buck stops with them. It is okay for fathers and mothers to have different positions on how to raise their children because each would have an idea on how to raise their kids. As the old cliche goes, â€Å"Two heads are better than one.† This is not to put mothers down; it’s just that fathers fill a place that can help to enhance a family’s relationship. Another reason why fathers must involve themselves in their children’s lives just as much as mothers is that the children are better for it. It is always reassuring for a child growing up to see two parents that are totally committed to each other. Children interpret this as both parents being devoted to the health and well-being of their offspring. This can continue on into other areas of a child’s life such as education and in social settings. Many studies show that children perform better when a father’s is interested in their schoolwork. In terms of a child’s social life, they are better able to make friendships and trust others if they have already experienced this in their family life. The final reason why fathers need to be involved in their children’s lives as much as mothers is that fathers are in a position to be a good example for their children. Fathers have life skills that they can teach to their children that mothers would have no idea about. The role of a father in his son’s life is extremely important. The way a father is involved in his son’s life affects not only how the son’s perceives his father but affects his behaviors later on in life. Fathers who are alcoholics and abusive husbands tend to have sons grow up to do the very same thing. On the other hand, a father who is a loving hus band and has found success in his life will likely have a son who is well-grounded and focused on his life goals. In another way, fathers can show a good example to their daughters too. Fathers who love and care about their daughters will likely find that they grow up to becoming successful young women. Fathers have a very important role to play in the lives of their children because they have always been thought of as the head of the household.

Hersey Blanchard Theory a case study application Coursework

Hersey Blanchard Theory a case study application - Coursework Example Alex and Stephanie are students who work in a supermarket (part-time) to supplement their income. Alex is stuck in the produce department (as per his boss, Dan’s style and approach), while Stephanie is assigned to different tasks by her boss Jonathan. Moreover, one of Alex’s colleagues gets paid more (for the same task) because she pleases her boss by saying complimentary comments to him. Jonathan is friendly, relaxed and easy to work with. Stephanie is highly excited to work in the culinary centre where she (and her colleagues) helps customers to create new and innovative recipes for their customers. The end result is that Alex is bored with his job while on the other hand Stephanie looks forward to her work. The Hersey Blanchard Theory: The Hersey Blanchard Theory is a situational approach to leadership. It is indicative of the psychological and job maturity levels of employees. (Muralidharan, 2009, 63). Situational leadership in management circles means, adjusting approach to employees according to their maturity or readiness levels. The Theory categorizes four types of employees termed as R1, R2, R3, and R4 according to their attitudes and approach to work (Robbins, & Coulter, 2009, 63). R1 level of maturity indicates low maturity. In this instance, the employee is unwilling or unable to follow orders, or even due to insecurity and lack of confidence in their abilities. In case an employee is categorized as R2, he or she will be willing to follow the leader and have a high level of personal confidence. But they may lack the ability or skill to do a job allotted to them. They will be confident about any task or job they have already mastered, but lack the sufficient skills and ability to perform new ones. R3 indica tes a situation that is directly opposite to R2. In this instance the employee has the ability, skill and confidence to undertake a specific job or task, but is unwilling to follow orders. R4 level employees are confident, willing, and ready to take up responsibility. They have high levels of job and psychological maturity. These are the four situations that managers (and supervisors) face in the work place regarding employee attitudes, and the reason why the Hersey Blanchard Theory is referred to as situational. It is up the manager to identify these traits and manage according to the situation at hand. The theory then provides four leadership approaches that will be suitable to handle each of these situations referred to as S1, S2, S3, and S4 (DuBrin, 2005, 144). S1 – Telling: As the term indicates, the manager simply tells or orders (autocratic) the employee to do a certain job or task. S2 – Selling: This is similar to S1, but here the manager uses a persuasive (or selling) approach. S3 – Participating: There is a high degree of participation and interaction between the manager and the employee. Employees are free to voice their opinions and suggestions which will be seriously considered by the manager. S4 – Delegating: Here the manager delegates employees to undertake their duties and will not interfere in their activities unless absolutely necessary. All that is required is that the manger be kept informed about the progress or completion of the duties (tasks/jobs) assigned. Hersey Blanchard Theory applied to the case study: With regard to Dan it can be said that he can be categorized as an R3 employee. He appears confident, but not happy in his current position. It could be out of boredom and the difference in pay scales (mentioned in case study). But there is no mention about

Federal Government Essay Example | Topics and Well Written Essays - 250 words

Federal Government - Essay Example After the great depression, however, when people were starved and had lost most of their properties, people believed that the Federal Government through its structures ought to provide necessities to its population. In as much as the then leadership under Roosevelt focused on fighting the great depression, and heeded the cry of various organized corporations and labor unions, the belief among the citizens was that such strategies were aimed at assisting bankers, large farmers and employees who belonged to certain unions. In a rather unfamiliar manner, even those who had been benevolent supporters of the strategy rebelled including Huey Long, who was the then senator for Louisiana. Such moves prompted the government to take charge of certain responsibilities including creating a social security fund project for the elderly and compensating workers who lost their jobs. Amidst all the challenges that existed nevertheless, the United States did not refuse to believe. And in as much as some of their recovery strategies stalled, the nation adopted mechanisms that has made it become a model nation to the whole

Poetic Understatement Essay Example | Topics and Well Written Essays - 1250 words

Poetic Understatement - Essay Example In crafting â€Å"99 things to do before you die†, Nila northSun selects a title that draws the readers’ attention with the promise of learning about those things that are imperative to accomplishing fulfillment in life. The poem references a list published in â€Å"Cosmo mag† of â€Å"99 things to do before you die†, and goes on to explain how the magazine targeted a specific audience—rich people (northern). The poem lists several of the line items included in the cosmo list including â€Å"div[ing] off a yacht in the Aegean†, â€Å"go[ing] to Monaco for the Grand Prix†, and â€Å"buy[ing] around the world air ticket† (northern). However, the purpose of the poem is less about how to live a fulfilling life than it is about the socio-economic and cultural disparities that exist across regions and ethnic groups within the United States of America. The author communicates this disparity directly as well as indirectly. The question, â€Å"so what’s a poor Indian to do?† is a direct way of indicating that the Indian may not be in a financial situation to accomplish the goals listed by Cosmo. northSun indicates that many of the line items on the Cosmo list are â€Å"things only rich people could do† (northern). The cosmo mag list appears to assume that readers will have access to a certain level of wealth. The magazine ignores the fact that many may never be able to pursue the activities described due to financial constraints. northern highlights this point in the statement, â€Å"we certainly know you don’t have to be rich before you die†, indicating that many are born poor and die never having had a change in financial status. To communicate disparity indirectly, northSun creates a list deemed more â€Å"culturally relevant† (northern).  

A Study of the Access Women Have in Male Dominated Sports Dissertation

A Study of the Access Women Have in Male Dominated Sports - Dissertation Example 2) Background to the study The challenges that hinder women from participating in male dominated sports are1 2.1. Female invisibility: discrimination in management, funding, media representation. 2.2. Discrimination in providing proper access to sporting facilities. 2.3. Body consciousness and Abhorrence of physical activity. 2.4. Attitudes and prejudices about sexuality. 2.5. Fears of personal safety, sexual harassment and abuse. 2.6. Parental and adult influence. 2.7. Stereotyping and prejudices about ethnicity. 2.8. Academic performance priority. 2.9. Lack of self-confidence 2.10.Lack of money 2.11.Lack of time 1= http://www.helpforclubs.org.uk/pages/download.aspx?id={4CC7A28A- 46A9-469B-A848-5F6AC358C615} 3. Justification A detailed explanation of each of the foregoing points is provided below. 3.1. Female invisibility: discrimination in management, funding, media representation At all levels, women’s sports and games attract less funding that men’s. Prize money at all major sports and games is vastly higher for men as compared to women. Women are under-represented in sports organisations. Girls miss out on involvement in sport because of lack of female role models. The four points mentioned above are hyper-inflated when it comes to women’s involvement in physical contact sports like football and rugby. Girls’ teams of such sports attract less sponsorship from local businesses because of the low revenue they generate, less spectators and low profile media coverage of their games.

PV system Assignment Example | Topics and Well Written Essays - 500 words

PV system - Assignment Example h. power storage: solar power can be put away in solar batteries and warm thermal solar frameworks for warming homes. At the point when there is light, the panels charge the batteries. Amid the night and climate conditions without the sun, the batteries are utilized to power the lightings (Conservative critic). (a) It is the design that expands the gathering of vitality from solar sources from a vast territory. It is attained by concentrating solar radiation from a vast region into a PV cell. It fundamentally lessens on the measure of the silicon wafer that is put into the generation of power. (b) Concentrating beams from the light is best accomplished by utilizing mirrors and lenses a procedure termed as optical force. Then again, a glass window built with luminescent substances in a methodology called luminescent concentration. (C) By guaranteeing that a lot of light from an unfathomable zone falls on a little PV cell, less measure of silicon is required to create and deliver high measures of energy subsequently lessening generation cost. For the luminescent concentration, the sheet of luminescent substance reradiates light, which wind up inside the glass. The reflection brought on falls on the PV cells to create power. The setup obliges that silicon wafer is just made utilization of on the edges. Productivity is a component considered from over edge as it prompts expanded proficiency (Ferowich). Ferowich, Grant. Solar Power: Cost and Reliability Make It the Perfect Energy Source. 31 MAY 2013. 4 OCT 2014

Behavioral Ecology of Bees Essay Example for Free

Behavioral Ecology of Bees Essay Behavioral Ecology of Bees Introduction Abstract   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Bees constitute one of the major plant pollinators globally. They experience adaptation for feeding on pollen and nectar. Pollination is as well defined as the process by which pollen grains are transferred between plants in reproduction. The amount of colonies (maintained by beekeepers) has gradually declined due to systematic use of pesticide, urbanization, Varroa mites, and tracheal. However, this has increased the competition of bee keeping for pollination purposes. Pollination refers to process via which transfer of pollen in plants reproduction occurs, thus facilitating sexual reproduction as well as fertilization. Pollination constitutes an essential step in flowering plants reproduction, resulting in a remarkable production of genetically diverse offspring. The general study of in-depth pollination entails various disciplines such as horticulture, botany, ecology, and entomology. Pollination was first viewed by scientists as an interaction process (in 18th century) between vector and flower. The fact that fruiting is fertilization dependent and is as a result of pollination guarantees the importance of pollination in agriculture as well as horticulture. Pollination can either be abiotic (mediated with no other organisms involved) or biotic (organisms carry the pollen grains from the flower’s anthers to the respective part of the pistil or carpel. Beetles have emerged to be the insects that pollinated the most ancient animal-pollinated flowers; thus the syndrome pertaining insect pollination emerged before the first appearance of bees. However, bees are (specialists) pollination agents with physical and behavioural modifications that facilitate pollination, and are relatively more efficient in performing the task than other pollinating insects such as flies, beetles, pollen wasps, and butterflies. The emergence of these floral specialists has driven the angiosperms’ adaptive radiation, and, consequently, the bees themselves (Riedl, (Johansen, Barbour, 2006).Methodology:   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   All the details availed by this research has been delicately collected from subject-related articles and in-depth analysis of various case studies.Semisocial and Eusocial bees Bees can either be solitary or live in certain community types such as for instance, the eusocial colonies (common among the bumblebees, stingless bees, and honey bees). Different types of sociality have evolved amongst the bees. In certain species, groups (of cohabiting females) may function and live as sisters; otherwise, labor division in the group guarantees them to be considered Semisocial. However, if, in spite of labor division, the group entails a mother and corresponding daughters, the group is then called eusocial. The mother serves as the â€Å"queen† while the daughters serve as â€Å"workers†. The system is said to be â€Å"primitively eusocial† if these cases are purely behavioural while, on the other hand; the system is â€Å"high ly eusocial† once the cases are found to be morphologically discrete. Nevertheless, the primitively eusocial bees constitute relatively more species as compared to the highly eusocial bees. In most cases, the highly eusocial bees are found to live in colonies with each colony having a single queen and several workers. Bumblebees are found to be eusocial, and the queen is found to initiate a nest singly. Colonies of bumblebees contain 50-200 bees at maximum population, which takes place in the duration mid-to-late summer. Bumblebees constitute one of the vital wild pollinators; however, their population has declined recently. Communal and solitary bees: Most bees are said to be solitary if all the females are fertile and inhabits own constructed nests. Solitary bees are vital pollinators whereby pollen is collected for providing the brood’s food in the nest. They are said to be oligoleges (collect pollen from a few plant species) unlike bumblebees and honey bees which ar e generalists. Monoculture and decline in bee species has made honey bee keepers concentrate on seasonally dynamic pollination areas. Fuzzy bees have an electrostatic charge thus adherence of pollen is facilitated. Bee gathering pollen grains are more efficient pollinators rather than those that gather nectar (Davies, Kreb, and West, 2012).In New Zealand, three general of native bees managed to venture into flower buds of the native mistletoe Peraxilla tetrapetala. Bellbird and Tui are some of the birds that orient the ripe bud top since cannot undergo self-opening. This results in a mechanism that causes spring-opening of the petals thus providing access to the pollen and nectar. The individual efficiency of bees determines their population value. Thus while pollination efficiency of bumblebees is high on cucurbits, the cumulative efficiency of honey bees colony is relatively greater as a result of their greater numbers. Bumblebees and honeybees use their spatial vision and color v ision to sort out tasks such as to recognize rewarding flowers especially during foraging. Cognitive factors are very significant in determining what bees see. With progressed visual experience, honey bees know much in using non-elemental processing, entailing rule learning and configurable mechanisms. Honey bees can as well learn delayed-matching-to-sample tasks, as well as the policies governing this decision-making process; exchange acquired rules between various sensory modalities. Lastly, bees can familiarize with complicated categorization tasks and also processing abilities of displaying numbers up to four (inclusive). A combination of the above evidences suggests that bees possess sophisticated visual behaviors (that fit cognition’s definition); hence simple primary bee vision models should know how various factors influence the results gained from experiments of animal behavior (Wilson, 2004). In regions where introduced honey bees have invaded, the floral resources of several plant species are used exclusively by honey bees, on the other hand, the native bees are endangered. However, native bees visit and pollinate the plant species in the regions where honey bees have not been established. In New Zealand (Heine, 1938; Thomson, 1927; Craig et al., 2000) and Tsamania (Goulson et al., 2003), similar effect has been realized as a result of invasion of honey bees. The predominance of honey bees in New Zealand will have severe plant-pollinator interactions, for instance, variations in order of gene flow in plants, native bees population decrease and boosted reproductive fitness of (invasive) exotic weeds. Pollination disruption by the invaded honey bees evident in plants grown in orchards suggests that removal of pollen by honey bees may lower pollination success in plant species such as ornithophilous plants. In addition to that, if the population of a particular bee species declines due to disease or natural cycles of parasites, a reliable and st able pollination source is provided when native bees fill the left gap. Nevertheless, native pollinators save money since they exhibit less need for imported honey bees’ hives. Sustainable management practices and reduced use of pesticides make organic farms vital participants in pollinator conservation efforts. For instance, since 70% of native bees nest underground, heavy tillage may be essential on farms where bees are needed pollinators. This benefits the growers by decreased need for rental-honey bees, greater farm biodiversity, and improved pollination services. Native bees can be relied upon by organic farmers who care for the chemical inputs (e.g., miticides and antibiotics) which are mostly used in maintenance of managed honey bees. Native bees pollinate crops when sufficient habitat is availed and bee-friendly practices of management are implemented (Kelly, 1998). Conservation of bees can be achieved via: classical biological control; existence of beneficial organis ms’ populations is practiced. Conservation biological control; habitats are provided to encourage populations of resident predatory insects. This reduces the need for pesticides and also provides extra food as well as nest habitat for bees. Resistant varieties; use of crops that are not vulnerable to pest insects reduce the use of pesticides, thus benefit both beneficial insect populations and pollinators. Native plants are the best source of bees’ food, but some garden plants are great sufficient for pollinators. Local native plants’ use; native plants are more attractive (to native bees) than exotic flowers. Choosing a wide variety of flower colors; especially purple, blue, yellow, violet and white attract bees. Diversified plants flowering all seasons; a range of pollinators (bee species), flying at varying times of the year, is supported (Holzschuh et al. 2007; Dramstad Fry 1995). Pollinators perform several ecological obligations in natural ecosystems (tha t they constitute a keystone combination in almost all terrestrial ecosystems), essential for plant reproduction as well as forming the foundation of a food web rich in energy (Kearns et al. 1998). Most bee species nest underground, digging tunnels heading to some brood cells. Honeybees and bumblebees are excluded from this phenomenon since they need a small cavity (e.g., an abandoned rodent nest) for their colony (Thomson Kearns 2001). Feral honey bees occupy large cavities, e.g., a hollow tree (Raw O’Toole 1999). In the temperate regions, honey bees manage winter as a colony. Within the cluster, an internal temperature of 95oF is maintained (optimal temperature for wax creation). Honey bees can forage optimally at the air temperature range 72-77oF, mostly because they exhibit physiological and behavioural mechanisms responsible for their flight muscles’ temperature regulation. Bees can be poisoned by insecticides (once they drink tainted nectar, absorb toxins via t heir exoskeleton, or when their pollen-collecting hairs trap insecticidal dusts. Movement or coverage of honey bee hives before application of pesticides cannot protect the wild bees’ scattered populations. However, during the winter season, bumblebee queens seek â€Å"winter safety† in some of the honey bee hives. Most of the bumblebees, hardly tolerate the winter season thus, are found dead as the spring season commences. In addition to that, chemical treatments of honey bees against Varroa mites saved several commercial operations and also improved cultural practices. In regions of mild climate, resistant breeds’ repopulation and Varroa resistance’s natural selection has facilitated the recovery of feral bees’ populations. References Kelly, Dave (1998). Native bees With New Tricks. New Zealand Science Monthly. Wilson, Bee (2004). The Hive: the Story of Honey Bee. London Morelle, Rebecca (2012). Extinct Short-haired Bumblebee returns to UK. Davies, N.R., Krebs, J.R., and West, S.A. (2012). An Introduction to Behavioural Ecology. 4th ed. West Sussex: Wiley-Blackwell, 2012. Print. pp. 387-388 Riedl, H., E. Johansen, L. Brewer, J. Barbour (2006). The Potential Conservation Value of Unmoved powerline Strips for Native Bees. Biological Conservation 124:133-148. Source document